3.5"inch TFT LCD Capacitive Touch Shield for Arduino Due,MEGA 2560,Uno w/Library

Description

Description
Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful (18-bit 262,000 different shades)! 320x480 pixels with individual pixel control. As a bonus, this display has a attached by default capacitive touch panel with controller FT6236 attached by default, so you can detect finger presses anywhere on the screen and doesn't require pressing down on the screen with a stylus and has nice glossy glass cover.
The pin32 (SDO) of 3.5 display module is also used by touch panel or SD card SPI interface, so we must cut off this pin to avoid conflict with the touch panel or SD card.
The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic Arduino (Due/Mega 2560).
This display shield has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. You can connect more sensors, buttons and LEDs.
Of course, we wouldn't just leave you with a datasheet and a "good luck!" - we've written a full open source graphics library at the bottom of this page that can draw pixels, lines, rectangles, circles and text. We also have a touch screen library that detects x,y and z (pressure) and example code to demonstrate all of it. The code is written for Arduino but can be easily ported to your favorite microcontroller!
For people who want the same screen but not in a shield form-factor, check out our 3.5" TFT breakout.
What's included in the package
Num
Standard Accessory Name
Qty
1
3.5"TFT Display with Capacitive Touch Panel and Breakout Board
1
2
Arduino Shield
1
*
The default power supply is 3.3V and the default interface is 8080 16-bit parallel interface.
Compatible with Following Arduino Boards
Board Name
MCU
I/O
Arduino MEGA2560
ATMEGA2560
54
Arduino Due
AT91SAM3X8EA
54
Arduino Uno
ATMEGA328
14
*
Please buy separately if you need the arduino boards.
Ebay doesn't allow listings to contain external links,so the documents link may be invalid. Please copy the below entire link to your browser for checking our documents(at the bottom of the page) or for bulk order.
h
ttps://www.buydisplay.com/arduino-3-5-tft-lcd-touch-shield-serial-spi-example-for-mega-due
Datasheet for Display Module
Format
Documents Name
Version
Language
Update Date
Size
3.5"320x480 Dots TFT LCD with Breakout Board Datasheet
1.0
English
Jan-09-2016
1.1M
Controller ILI9488 Datasheet
1.0
English
Jul-02-2013
3.2M
Datasheet and Schematic for Arduino Shield
Format
Documents Name
Version
Language
Update Date
Size
ER-AS-ILI9341 Datasheet
1.0
English
Feb-24-2016
828K
ER-AS-ILI9341 Arduino Schematic Diagram
1.0
English
Oct-16-2018
192K
Datasheet for Touch Controller
Format
Documents Name
Version
Language
Update Date
Size
3.5 inch Resistive Touch Panel Outline Drawing
1.0
English
Jan-08-2016
270K
Resistive Touch Panel Controller XPT2046 Datasheet
1.0
English
May-08-2007
579K
3.5 inch Capacitive Touch Panel Outline Drawing
1.0
English
Apr-14-2015
257K
Capacitive Touch Panel Controller FT6236 Datasheet
1.0
English
Jul-24-2014
674K
Tutorial - Arduino Due (MEGA 2560)Libraries,Examples
Format
Documents Name
Version
Language
Update Date
Size
Libraries+Examples for 16-bit Parallel 3.5"Resistive Touch
1.0
English
Feb-28-2019
2.76M
Libraries+Examples for 16-bit Parallel 3.5"Capacitive Touch
1.0
English
Sep-08-2016
90.0K
Specification
Gross Weight (kg)
0.1100
Manufacturer
EastRising
Continuity Supply
We promise the long term continuity supply for this product no less than 10 years since 2015.
Part Number
ER-TFTM035-6-4123
Display Format
320x480 Dots
Interface
8080 8-bit Parallel , 8080 9-bit Parallel , 8080 16-bit Parallel , 8080 18-bit Parallel , 3-Wire Serial SPI, 4-Wire Serial SPI
IC or Equivalent
ILI9488
Appearance
RGB on Black
Diagonal Size
3.5”
Connection
Pin Header, FFC-Connector
Outline Dimension
66.4W)x96.7(H)mm
Visual Area
49.96x74.44mm
Active Area
48.96(W)x73.44(H)mm
Character Size
No
Dot (Pixel) Size
No
Dot (Pixel) Pitch
0.153x0.177mm
IC Package
SMT
Display Type
TFT-LCD Color
Touch Panel Optional
Yes
Sunlight Readable
No
Response Time(Typ)
20ms
Contrast Ratio(Typ)
500:1
Colors
65K/262K
Viewing Direction
12:00
Viewing Angle Range
Left:70.0 , Right:70.0 , Up:70.0 , Down:50.0 degree
Brightness(Typ)
280cd/m2
Backlight Color
White Color
Backlight Current (Typ)
120mA
Power Supply(Typ)
5V
Supply Current for LCM(Max)
115mA (Vdd=3.3V) 130mA (Vdd=5V)
Operating Temperature
-20℃~70℃
Storage Temperature
-30℃~80℃
Series Number
ER-TFT035-6
About Us
We're China-based global display manufacturer named EastRising Technology Co.,Ltd. that has a worldwide business in design,
produce and sell various displays for small to large companies since 2003. Our web site is buydisplay.com.
Long Term Continuity Supply Warranty
We promise the long terms continuity supply and would never end.Some controller IC may stop the production,we'll try our
efforts to find the completely compatible ones.If the equivalent is unavailable, we¡¯ll make the new tooling and use the most
similar IC as replacement.So you don't have to worry even your research time is very long.
Shipping Policy
All products will be checked carefully and packed in good condition before shipping.We e-mail all customers with tracking
information immediately after the shipment for status tracking.
Item will be shipped within 1 business day after the payment has been received.
Customs fees and import duties for exports are buyer's responsibility.
Warranty
All products are covered under our limited warranty, which provides all products are free of functional defects for a period of one
year from the date of receipt and all products are free of visual defects and missing parts for a period of 30 days from the date
of receipt.If a product was damaged during shipping or the order is incorrect,you must notify us within 2 days of receipt.
How to return a product
First request an RMA number from our sales with the information:part number,reason for return,order number.
Our sales will then either issue an RMA number, ask you for more information, or offer to help you resolve a technical problem
so that the product does not need to be returned. Products must arrive here in the same condition as when you received them.
You are responsible for return shipping and insurance.Please make sure your RMA number is on the shipping label and on any
documents you include with the product.
After we receive the product, we inspect it to determine the cause of any defect, then update by email with our findings. This
process usually takes five business days.