Eachine Wizard X220 FPV Racer RC Drone and Flysky FS-I6 Transmitter RTF

Description

Eachine Wizard X220 FPV Racing Drone Blheli_S F3 6DOF 5.8G 40CH 200MW VTX 700TVL Camera w/ FlySky I6 Remote Control RTF
For more information of Eachine Wizard X220, please refer to Banggood BLOG at
https://blog.banggood.com/eachine-wizard-x220-review-50401.html
Item
Specification
Features
Eachine Wizard  X220
Wheelbase: 220mm
GMachine arm: 4mm carbon fiber
Flying times: 12 minutes
Weigh: 484g
(with battery)
Take off weigh: 535g
Package size: 440 x 300 x 100mm
Package weigh: 1325g
Compatible with max 5 inch propeller
Compatible with 2206, 2208 motor
Can be used with 4S/3S battery
Inclined motor base design, fast speed
Removable protection motor base
Eachine  MN2205 2300KV Motor
KV : 2300
MAX thrust: 780g
Length: 32.2mm
NO.OF cell : 2-4S
Diameter : 27.9mm
Framework : 12N14P
Shaft : 5mm
Propeller :  5 inch
Weight: 25g
Color: Purple
Eachine 20A BLHELI_S  ESC
Item name : 20A BLHELI_S  ESC
Con.Current : 20A
Peak Current(10s) : 25A
Input Voltage : 2-4S
BEC : No
Programming : YES
Firmware : Blheli_S
Weight :7.9g
Size(PCB) : 27*12mm
700TVL Camera
Power supply : 3.6-5.5V (powered off TX)
Power consumption : 60mA @5V
Imager : 1/3” CMOS, 700TVL
Angle : 127° diagonal FOV, 110° horizontal FOV
FPV tuned light handling
System : PAL
Lens : 2.8mm IR coated
FOV : 127°diagonal 110°horizontal (ideal for fixed camera)
Operation temperature : -20 to 70°C
Square : 29 X 29 X 23.5mm
Lens extrude (LxDia) : 15mm X 14mm
Weight : 12g
5.8G 200mw 48ch Transmitter
Modulate : Wideband FM Modulate
Video Format  : NTSC/PAL
Output Impedance : 50 Ohm
Output Power : 23-24dBm
Channel: 48 CH
Operating Voltage : 7V-24V
Supply Current : 190mA
Operating Temperature : -10~85℃
Video Band Width : 0~8.0 MHz
Audio Carrier Frequency : 6.5 MHz
Video Input Level : 0.8~1.2 Vp-p
Video Input Impedance : 75 Ohm
Audio Input Level : 0.5~2.0 Vp-p
Audio Input Impedance : 10K Ohm
Connector: RP-SMA Female (Inner needle)
Antenna Connector:  RP-SMA Male (Inner hole)
Dimension: 40mm x 23mm x 8mm
Weight: 7.3g
Flight controller
F3 SPRacing, betaflight 2.9.1 version
FlySky FS-I6 2.4G 6CH remote control
Channels : 6 Channels
RF range : 2.40-2.48GHz
Bandwidth : 500KHz
Band : 142
RF power : less than 20dBm
2.4ghz system : AFHDS 2A and AFHDS
Code type : GFSK
Sensitivity : 1024
Low voltage warning : less than 4.2V
DSC port : PS2; Output:PPM
Charger port : No
ANT length : 26mm
Weight : 392g
Power : 6V 1.5AA*4
Display mode : Transflective STN positive type, 128*64 dot matrix VA73*39mm, white backlight.
Size : 174x89x190mm
On-line update : yes
Color : Black
Certificate : CE0678, FCC
Model memories : 20
Control range: 500m
Flysky 2.4G 6CH FS-iA6B Receiver
Channel: 6
Frequency Range: 2.4055--2.475GHZ
Band Width Number: 140
Transmitting Power: ≤ 20dBm
RF Receiver Sensitivity: -105dbm
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Encoding: GFSK
Antenna Length: 26mm * 2 (dual antenna)
Input Power: 4.0-6.5V DC
Dimension: 47 x 26.2 x 15mm
Weight: 14.9g
Color: Black
i-Bus Interface: Yes
Data Acquisition Interface: Yes
Compatible Transmitter: Compatible with FS-i4,FS-i6,FS-i10,FS-GT2E,FS-GT2G
No Lipo Battery included
4 New AA Batteries in transmitter included
Beeper installed for low voltage alarm
RSSI not implemented
Flight controller does not have OSD
Eachine Wizard X220
Package included:
1 x Eachine Wizard X220
1 x Flysky FS-I6 2.4G 6CH remote control (transmitter)
1 x Flysky iA6B receiver
2 x 2205 2300KV motor CW purple
2 x 2205 2300KV motor CCW purple
4 x Eachine 20A BLHELI_S  ESC
4 x 5045 Arris 3-blade propeller green
4 x Gemfan 5040 2-blade propeller black
1 x F3 SPRacing flight controller
1 x 700TVL camera
1 x 5.8G 48CH 200mw transmitter
1 x dipole VTX Antenna
1 x Battery strap
1 x Bind tool for receiver
4 x LEDS on bottom legs under motor
BetaFlight/SPRACINGF3 3.0.1
Currently Installed (Can be upgraded in you chose)
Technically, it must be listed as used as I test flew it and this is the first time a model has been bound to it.
This sale does not include everything you would need to fly FPV. With this setup you can fly line of site after getting a Lipo battery and charger. The sale includes the quad and the transmitter only. The transmitter has 4 AA batteries in it.
This is RTF. The transmitter model for the Arris is setup with 3 flight modes, arm, and tested. Endpoints set. Model has test flown with one battery pack prior to listing. PIDS are default betaflight. Buyer will get the switch layout.
Note on drones I sell - Due to the nature of this hobby I do not take returns on drones. I represent my sales ads as accurately as possible.  You can fly it line of site but this is really meant to fly fpv. A Video and some pictures were taken of this quad flying and its condition and functions prior to listing to test out the RTF config. Recommend using 3S or 4S, 1000 to 1300 mAH LIPO battery 75-100c.
Transmitter can be moded to 10 channels. Many other mods available online for both of these. See youtube or google for reviews and mods. Search Eachine Wizard x220 several variations of this quad.
No International Shipping