Hot Wire Foam Cutting 4-Axis CNC Machine AERO 3D Shapes Wings Aeronautical Parts

Description

Fast Shipping
Made in the USA
Quality Customer Service
Quality Foam Cutting Products Since 1991
Hot Wire Foam Cutting CNC Machine AERO Model
New
Hot Wire Foam Factory
#054
Aero CNC 4-Axis Foam Cutting Machine
Proudly Made and Supported in the USA!
FINANCING OPTIONS AVAILABLE
DETAILS:
Each of our hot wire machines has been purpose-built to fill specific needs of different industries such as aeronautics prototyping with our Aero CNC, which is also useful in many other fields requiring high-angle cuts. It has high-torque motors for rapid speeds of up to 400+ inches per minute and precise control over cutting speed. The unique design has minimal moving parts for easy and ultra-quiet operation and maintenance, while providing unlimited growth potential for advanced users.
Only 5 parts to assemble!
INCLUDES:
All tools and instructions required for easy install and maintenance
Mach 3 and vector conversion software. Easily run it in 2-axis mode out of the box.
Motion Control Box
Keyboard, Mouse and Windows 10 PC with Pre-Installed Software
Power Supply
1
00' Extra Cutting Wire
DOES NOT INCLUDE:
Monitor
(Optional) 4-Axis CAM Software
LEAD TIME:
Lead times vary. For current lead times, please contact us.
SHIPPING:
We are located in Lompoc, CA. We can crate and ship your machine directly to your chosen location at an added fee. If you are local, you can pick up from our location. For crate and shipping estimates, please contact us directly for a quote.
INTERNATIONAL CUSTOMERS:
We can ship outside of the US. Please contact us to arrange shipping.
Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.
NOTE:
Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
Aero CNC Intro
4-Axis Capability
CNC Demo
CNC Demo
PAYMENT
SHIPPING
WARRANTY & RETURNS
SUPPORT
PAYMENT
SHIPPING
WARRANTY & RETURNS
SUPPORT
We accept payment by any of the following methods:
PayPal Visa Amex Discover MasterCard
Please contact us for financing options.
Buyers in California will be charged 7.75% sales tax.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner!
Listed price is for pick-up at manufacturer facility in Lompoc, CA and does not include delivery. Contact us to schedule a pick-up.
We can crate and ship for an additional charge.
Packages are always tracked and insured.
Contact us for a crating and freight quote.
Lead times vary and may fall between 10-15 business days. We do not count weekends and holidays as business days.
We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay.
​​​​​​​
Limited Warranty & Limitation of Liability Information:
This product is warranted for commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of
charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above.
Return Policy:
HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.
Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying.
Please send a message
(9AM-4PM, PST, Monday through Friday)
New [Hot Wire Foam Factory] #054 Aero CNC 4-Axis Foam Cutting Machine Proudly Made and Supported in the USA! DETAILS: Perfect for tapered airplane wings, architectural shapes, letters, and much more! The most user friendly and affordable USA made and supported 4-Axis CNC foam cutter on the market Fast and easy assembly of just 5 parts Includes Mach 3 and Vector Linker software. Easily run it in 2-axis mode out of the box Cutting Area: 48-inch Wire Length x 30-inch Horizontal Travel x 36-inch Vertical Travel Quiet and extremely accurate motion control Extreme cutting precision with accuracy to .001” High-torque motors with rapid speed up to 200” per minute. Cutting speed is dependent on material and desired precision Unique, low-maintenance design with minimal moving parts. Just keep it clean Unlimited growth potential for advanced users. Hardware and software capabilities for complex prototyping INCLUDES: 99% Assembled Machine With Tools for Installation Assembly and Operating Instructions Motion Control Box PC with Pre-Installed Software Keyboard Mouse Power Supply 100' Extra Wire YOU NEED: Monitor 4-Axis CAM Software (e.g. DevFoam) LEAD TIME: Lead times vary. For current lead times, please contact us. SHIPPING: We are located in Lompoc, CA. We can crate and ship your machine directly to your chosen location at an added fee. If you are local, you can pick up from our location. For crate and shipping estimates, please contact us directly for a quote. INTERNATIONAL CUSTOMERS: We can ship outside of the US. Please contact us to arrange shipping. For more of our tools, check out our [Shop.] (http://www.ebay.com/usr/hotwirefoamfactory) Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools. NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
Quality Customer Service
Made in the USA
Fast Shipping
Quality Foam Cutting Products Since 1991
Hot Wire Foam Cutting CNC Machine AERO Model
Aero CNC Intro
4-Axis Capability
CNC Demo
CNC Demo
New
Hot Wire Foam Factory
#054
Aero CNC 4-Axis Foam Cutting Machine
Proudly Made and Supported in the USA!
DETAILS:
Perfect for tapered airplane wings, architectural shapes, letters, and much more!
The most user friendly and affordable USA made and supported 4-Axis CNC foam cutter on the market
Fast and easy assembly of just 5 parts
Includes Mach 3 and Vector Linker software. Easily run it in 2-axis mode out of the box
Cutting Area: 48-inch Wire Length x 30-inch Horizontal Travel x 36-inch Vertical Travel
Quiet and extremely accurate motion control
Extreme cutting precision with accuracy to .001”
High-torque motors with rapid speed up to 200” per minute. Cutting speed is dependent on material and desired precision
Unique, low-maintenance design with minimal moving parts. Just keep it clean
Unlimited growth potential for advanced users. Hardware and software capabilities for complex prototyping
INCLUDES:
99% Assembled Machine With Tools for Installation
Assembly and Operating Instructions
Motion Control Box
PC with Pre-Installed Software
Keyboard
Mouse
Power Supply
100' Extra Wire
YOU NEED:
Monitor
4-Axis CAM Software (e.g. DevFoam)
LEAD TIME:
Lead times vary. For current lead times, please contact us.
SHIPPING:
We are located in Lompoc, CA. We can crate and ship your machine directly to your chosen location at an added fee. If you are local, you can pick up from our location. For crate and shipping estimates, please contact us directly for a quote.
INTERNATIONAL CUSTOMERS:
We can ship outside of the US. Please contact us to arrange shipping.
For more of our tools, check out our
Shop.
Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.
NOTE:
Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
PAYMENT
We accept payment by any of the following methods:
PayPal Visa Amex Discover MasterCard
Buyers in California will be charged 7.75% sales tax.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner!
SHIPPING
Listed price is for pick-up at manufacturer facility in Lompoc, CA and does not include delivery. Contact us to schedule a pick-up.
We can crate and ship for an additional charge.
Packages are always tracked and insured.
Contact us for a crating and freight quote.
Lead times vary and may fall between 10-15 business days. We do not count weekends and holidays as business days.
We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay.
​​​​​​​
WARRANTY & RETURNS
Limited Warranty & Limitation of Liability Information:
This product is warranted for commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of
charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above.
Return Policy:
HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.
Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying.
SUPPORT
Please send a message
(9AM-4PM, PST, Monday through Friday)